Configure EIGRP on the ASA Firewall

Configure EIGRP on the ASA Firewall

- in Security
5332
0

Create an EIGRP routing process

asa-jmcristobal(config)# router eigrp as-num

Configure the interfaces and networks that participate in EIGRP routing:

asa-jmcristobal(config-router)# network ip-addr [mask]

We can configure one or more network statements with this command.

Example:

asa-jmcristobal(config)# router eigrp 1
asa-jmcristobal(config-router)# network 10.1.1.0 255.255.255.0
Customize the EIGRP Hello Interval and Hold Time

Both the hello interval and the advertised hold time are configured on a per-interface basis.

Step 1.- access the interface to be modified

asa-jmcristobal(config)# interface phy_if

Step 2.- Change the hello interval:

asa-jmcristobal(config-if)# hello-interval eigrp as-num seconds

Step 3.- Change the hold time:

asa-jmcristobal(config-if)# hold-time eigrp as-num seconds

By default, hello packets are sent every 5 seconds and the advertised hold time is 15 seconds (three times the hello interval).

Example:

Modify hello interval and hold time for eigrp process id 1

asa-jmcristobal(config)# interface inside
asa-jmcristobal(config-if)# hello-interval eigrp 1 20
asa-jmcristobal(config-if)# hold-time eigrp 1 60
EIGRP verification commands

Displays the interfaces participating in EIGRP routing.

show eigrp [as-number] interfaces 

Displays the EIGRP neighbor table.

show eigrp neighbors

Displays the EIGRP topology table.

show eigrp topology 

Displays EIGRP traffic statistics.

show eigrp traffic

Facebook Comments

You may also like

How-to Install SSH Server on Linux 

1.- Install with apt-get command on Ubuntu: sudo